| Customization: | Available |
|---|---|
| Type: | Welding Flange |
| Material: | Stainless Steel |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Products Data:
| 1 | Material | Stainless steel |
| 2 | Process | Forging and machining |
| 3 | Pressure | PN0.6MPa,PN.0MPa,PN1.6MPa, |
More Details:
Application:
For seal or connect of pipe/tub-e lines
Material:
304,304L,316,316L,carbon steel or other material on request
Standard:
ANSI,DIN,JIS,BS,EN1092-1
Size:
DN15 (1/2") to DN5000 (200")
Type:
Threaded Flanges, Socket Welding Flanges, Blind Flanges, Other Flanges
Types' Specification
Welding neck
1, Preferred for high-pressure, subzero or elevated temperature
2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3, Easily radiographed and provides excellent stress distribution
Slip-on
1, Not normally used in high-stress applications due to low hub and weld attachment
2, Silps over outside of pipe
3, Inside of flange welded at hub and end of pipe
Lap joint
1, Used where bolt alignment or access for cleaning is required
2, Similar to slip-on flange when used with lap joint stub end
3, Radius at intersection of flange face and bore to match lap joint stub end
Threaded
1, Used where welding would would be hazardous
2, Designed for low-pressure and non-cyclic applications
3, Bore is threaded to match pipe thread
4, Tapered to seal pipe and flanges
Socket welding
1, For small-diameter chemical processes, hydraulic and stream distribution lines
2, Similar to slip-on flange
3, Counter bore matches pipe bore, allowing unrestricted flow
4, Counter bore from hub side fits pipe's outer diameter - can insert pipe in socket with fillet weld at hub
Blind
1, Used to close ends of piping
2, Has no bore
3, Permits access to sealed lines
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
| 1. Samples: Buyer bear the air fee, but this fee will be reduced from order directly | |
| 2. Delivery: Never delay delivery time | |
| 3. On material: Ensure material pure | |
| 4. After Sales: Free replacement if any quality problem Please contact our After-sales service department in time within 30days after you received the cargo. Working Time: 7:00 a.m.- 24:00 p.m. (Beijing time) |
|
| Process | Please provide the copy of Sales Contract and describe the problems appeared. |
| Slight problem | Please send the proof to our After-Sales Department, we will reply within two days. |
| Serious problem: |
a. We will dispatch our Quality and Problems Appraisers to make a confirmation |
| b. Have a negotiation of the compensation and sign agreements | |
| c. Our After-Sales Department will perform the duties as the agreements | |
| Replacement | Free replacement if there is any quality problem |
| Sanitary valve | Sanitary Butterfly Valve |
| Sanitary Check Valve | |
| Sanitary Ball Valve | |
| Sanitary Reversal Valve | |
| Sanitary Diaphragm Valve | |
| Sanitary Sample Valve | |
| Sanitary Pipe Fitting | Sanitary Elbow |
| Sanitary Tee | |
| Sanitary Reducer | |
| Sanitary Cross | |
| Sanitary Triclamp Ferrule | |
| Sanitary Cap | |
| Sanitary Pipe Hanger | |
| Sanitary Tank Cleaning Ball | |
| Sanitary Hose Joint | |
| Sanitary Unions | |
| Sanitary Sight Glass | |
| Sanitary Strainer | |
| Sanitary Manway | Sanitary Round Manway without Pressure |
| Sanitary Round Manway with Pressure | |
| Sanitary Square Manway | |
| Sanitary Oval Manway | |
| Sanitary Pump | Sanitary Centrifugal Pump |
| Sanitary Lobe Pump | |
| Sanitary Self Priming Pump | |
| Sanitary Tank | Storage Tank |
| Fermentation Tank | |
| Mixing Tank | |
| Warm-keeping Tank | |
| Sanitary Tube | Seamless Tube |
| Weldless Tube | |
| Sanitary Gasket | Silicone/EPDM Gasket for Triclamp |
| Silicone/EPDM Gasket for Union | |
| Silicone/EPDM Gasket for Butterfly Valve |
){kind=link}